Makita DCL184Z 18V Cordless Cleaner (LXT-Series) [Bare Tool]

FEATURES:
Higher suction power and longer continuous run time
Optimum housing design for car interior cleaning
Comes with a variety of special nozzles optimum for cleaning car interior
Also accepts the nozzles for our existing cordless cleaners
Blower nozzle complete converts to a blower for added versatility
Cleaning can be done without nozzle by using beveled end straight pipe as a nozzle
Low noise achieved by noise absorbing sponge attached inside the housing, noise level is the same as CL121D while increasing suction power
Hose can be extended up to 1m
Hose can be stored on the cleaner by inserting Straight pipe into the cleaner body
Shoulder belt can be easily slung over your shoulder for added mobility
Up to 80 min. of continuous use from a single fully charged BL1830B
Battery capacity warning lamp starts blinking when the remaining battery capacity gets low
Push button switch with air volume selection (Max/High/Normal) for reduced fatigue in continuous use
Accepts disposable paper dust bag as well as cloth dust bag
Cloth dust bag is washable in soapy water for repeated use
Seat nozzle; the narrow nozzle with lint brushes and side brushes are ideal for removing fine dust such as lint or hair from car seat
Soft brush; convenient for cleaning air conditioner vents
Sash nozzle for cleaning corners and crevices of a car or furniture
Mat nozzle; the nubs around the suction opening help raking out sand grains. Rubber nozzle; very gentle to the surface to clean and ideal for cleaning bottom corners such as a door pocket or console box between seats. Blower attachment; Dust can be blown off by attaching the blower attachment to the air exhaust vent of the cleaner. Battery protection circuit protects against overloading and over-discharging. Multi-contact terminals ensure stable contact with battery
Bare Tool – Battery and Charger not included
SPECIFICATIONS: 
Capacity
Cloth Dust Bag / Paper Dust Bag: 500 / 330 mL
Continuous Use (w/ BL1830B) (min.)
Max / High / Normal: 20 / 30 / 80
Max Air Flow
Cleaning: 1.4 m³/min
Max Sealed Suction (water column)
5.4 kPa (550 mmH₂O)
Suction Power
Max / High / Normal: 38 / 23 / 5 W
Max Air Flow
Blowing: 0.4 m³/min
Max Air Velocity
Blowing: 100 m/s
Vibration Level
0.4 m/s²
Noise Level
Max / High / Normal: 68 / 65 / 58 dB(A)
Dimensions (L x W x H)
w/ BL1830B / BL1840B / BL1850B / BL1860B: 365 x 138 x 202 mm (14-3/8 x 5-7/16 x 8″)
Net weight
1.8 – 2.2 kg (4.0 – 4.9 lbs.)